Choose Your Fire
We provide an extensive choice of gas fires with options to suit your home. Whether you have a traditional brick chimney, pre-cast flue or no flue at all, we have a model to fit.

Electric
Connect with clean, instant, efficient and thermostatically controlled heat. With the option of a flame effect only setting you can enjoy a comforting glow without the need to generate heat.

Gas
Controllable and convenient operation, with a discreet Smartslide control mounted on the top side of the fire, or a manual control with igniter located behind the fret – flame height and heat output is at your control.
All gas fires require a chimney or flue to conduct expended gases to the exterior. To identify which type your house has and which model of fire will fit (slimline, mid-depth or deepline), check the simple descriptions below.

Brick Chimney Flues Class 1
Easily recognizable from the stack above the roof line (usually with a pot or gas terminal). Once the fire is sealed into the chimney cavity, any harmful gases are expelled up the chimney itself and out of the roof. Any of our gas fires can be installed here.

Pre-Fabricated Flues Class 2
Identifiable by the metal flue and terminal of the roof, this flue system is suitable for all our gas fires. Piping from your flue right down to your fire transports the gases from the fire and out of the house. Again this flue is suitable for installation with any of our gas fires.

Pre-Cast Flues
Recognisable by a ridge vent on the roof line, and built from concrete or clay blocks, usually within the wall cavity, the expelled gases are vented through this shallow passage and out of the roof. Pre-cast flues are perfect for our Slimline or Deepline* Radiant gas fires.
*Deepline Radiant fire suitable when installed with a 75mm rebated surround.

Balanced Flue
Identified by a round flue installed directly through an external wall or the roof. Our balanced flue fire is completely sealed from the front, allowing air to circulate through the flue to the rear of the fire. Cold air is sucked into the fire to combust and the gases are expelled via the same point. This fire is highly efficient due to its airtight installation and can be installed without a chimney breast.
Once you have determined the type of flue your house has, you can now determine the most suitable engine for your gas fire.
Radiant gas fires pull in cold air through their open front, circulating it over the real flames and emitting it back into the room. Convector means that hot air is transferred through the canopy to circulate the warmth around your room. *When installed with a 75mm rebate surround

Slimline Radiant
Install In:
Pre-Cast, Pre-Fab or Brick Chimney
Effciency:
50% (58% with Xtra Canopy)
Control:
Smartslide or Manual
Heat Input:
Low 3.0kW High 6.75kW
Heat Output:
Low 1.4kW High 3.1kW

Deepline Radiant
Install In:
Pre-Cast,*, Pre-Fab or Brick Chimney
Effciency:
51% (54% with Extra Canopy)
Control:
Smartslide or Manual
Heat Input:
Low 3.0kW High 6.75kW
Heat Output:
Low 1.4kW High 3.2kW

Deepline Convector
Install In:
Pre-Fab or Brick Chimney
Effciency:
62%
Control:
Smartslide or Manual
Heat Input:
Low 3.0kW High 6.75kW
Heat Output:
Low 1.7kW High 3.8kW
A panel of ceramic glass prevents air from being sucked up through the front of the fire and directing heat up the chimney, meaning a higher percentage of convected and radiant heat is propelled back into the room.

Mid-Depth
Install In:
Pre-Fab or Brick Chimney
Effciency:
87%
Control:
Smartslide
Heat Input:
Low 2.5kW High 4.1kW
Heat Output:
Low 2.0kW High 3.4kW

Deepline
Install In:
Pre-Fab or Brick Chimney
Effciency:
89%
Control:
Smartslide
Heat Input:
Low 2.5kW High 5.5kW
Heat Output:
Low 2.0kW High 4.5kW

Widescreen
Install In:
Pre-Fab or Brick Chimney
Effciency:
88%
Control:
Smartslide
Heat Input:
Low 2.5kW High 5.5kW
Heat Output:
Low 2.0kW High 4.4kW

Balanced Flue
Install In:
Balanced Flue
Effciency:
86%
Control:
Smartslide or Manual
Heat Input:
Low 2.9kW High 4.2kW
Heat Output:
Low 2.2kW High 3.3kW